texhFX Reflow 3.0!

  • High Tg 4 layer PCB for high Heat!
  • up to 500 deg C PID temp control
  • 12 MIPS 48 Mhz PIC MCU with 12 bit A2D!
  • AD597 K-type amp
  • Can use either I2C LCD and keypad or serial LCD!
  • Program profiles up to 2 days long!
 


     texhFX microDAC!

  • 12 bit 2 CH DAC / 10 bit ADC
  • 18F14K50 12 MIPS MCU
  • USB / Self powered (low noise VREG)
  • 256K SPI eeprom for wavetable
  • Windows and Linux demos!!
 


     2 axis gyro modules!

     choice of 2 modules
  • IDG1215 rate 67 deg/s
  • IDG650 dual rate 440/2000 deg/s
  • 2 axis Gyroscope
  • low noise 0.3% LDO Vreg
  • Temp out pin
  • VREF pin
  • Op-amp buffering
  • Zero pin function
  • Choice of headers
 


     texhFX Motion UAV!

  • 40 MIPS dsPIC33 MCU
  • On screen display video overlay
  • Full IMU / 6 DOF optional
  • 32 CH GPS/DGPS
  • Xbee telemetry upto 15 miles
  • 16 IO (8 servo)
  • FS USB / I2C / SPI / UART ports
 


     texhFX Zigbee Mesh!

  • 48 Mhz, 12 MIPS 18f4550 MCU
  • Xbee mesh networking
  • 10 bit ADC
  • ultra low power
  • small size
  • FS USB 2.0 port
  • I2C port
  • 256k I2C eeprom
 

 

News and Releases

2009.07.03 We are officially USA Government Contractors now!! Yep we're in the CCR, we even have a CAGE code. Pretty soon you may see us in the GSA Catalog :-) And guess what? Our preference to businuess partners and subcontractors is going to Vets like us. WE SUPPORT VETS all the way!! Have a great 4th everyone, stay safe and remember all the Vets who brought you this freedom courtesy of the USA Military. :-)

2009.07.01 Another quarter down, and our make-a-wish foundation donation has went out! We urge you all to take part in the world, try to cure its problems and most of all BEHAVE and BE GOOD!! Thanks for your support.

2009.06.30 techFX REFLOW TOOLS 5.0 is here!!! go download it! Tons of new features and bug fixes, 3 algorithms to choose from, adjustable pid gains and timebases. YES you dont have to use a regular thermocouple, you can use an Infrared thermocouple from Omega Engineering. :-)


 

 

 

 

 

 


 

 

 

 

 

 

 

2009.06.27 Thankyou Airforce!!! We picked up this used SPECTRUM ANALYZER that goes upto 40 GHZ!!! CHEAP too (115 GHZ with other options).

2009.06.22 techFX Reflow Tools 5.0 for PCB 2.0 only is out! This is the final version for that hardware version. PCB 3.0 guys can use this if they wish to get some new features, however PCB 3.0 software will be out soon with tons more features and new firmware!! Keep checking back for more!

2009.06.16 The techFX Data Hopper PCB 1's (the xmitter pcb) have been ordered for production!! After verification of this PCB it will go on sale and well begin production of PCB 2 the receiver. PCB3 will be the spectrum analyzer / GLCD board. It is a small 2.5" x 3.5" design with lots of advanced features. We will sell the PCB's here cheaply. Goto the forums and check it out!

2009.06.01 NEW techFX microDAC! Something new for june, in the form of an ultra-small 1.5" x 1.2" signal gen controller. With its HID interface for windows you wont need a driver, and for linux it uses LIBusb for easy development!! Small, cheap with lots of IO options. Go get yours now!

2009.05.23 NEW techFX Reflow 3.0 is here! Go buy one now! It can handle the heat upto 85 deg C with its High Tg PCB. Also now has 12 bit A2D and will support Infrared Thermocouples in software in the near future! www.Omega.com makes them, they work great and are pretty cool.

2009.04.21 NEW IDG 1215 2 axis gyro modules featuring 67 deg per sec rate output, and the same great options as our IDG 650 module!! Go get em now!

2009.04.09 WE ARE OUT OF REFLOW CONTROLLERS! Yes its true. You have bought us out! But the good news is that Hardware version 3.0 is coming up very soon, and with that comes a software update as well! We won't leave you 2.0 owners stranded, you will get a software update also. So look for the new techFX Reflow 3.0 due out within a month!!

The last few of you who ordered techFX 2.0 reflow controllers got the special commemorative edition with the special BLUE LED!! wooohoo :) I starred at it for a good 20 minutes. It was prettttyyy bluuuuueeee LED!! :) We love the blue LEDs so much now that well stuck em on everything we have even if it doesnt use electricity. we love em.

2009.04.06 Our quarterly donation to the Make-A-Wish Foundation has went out! Thanks to everyone who made this possible!

2009.03.15 NEW! simply CSV editor with inline WYSIWYG HTML gives OSCommerce easyPopulate users a better way to view and edit their data offline! Edit offline with WYSIWYG HTML!

2009.03.07 NEW! IDG650 based 2 axis gyro modules! With low noise 0.3% voltage reg, op-amp, and filtering--these babies can do 450 deg/s or 2000 deg/s all in a super small 0.7"x0.7" package! NOW AVAILABLE!!

2009.01.26 We've added a new reflow demo video with our Black and Decker infrawave showing how to do double sided SMD with very few tools.

2009.01.01 Our quarterly donations have went out to USO.org and Wish.org. All future donations will goto the Make a Wish foundation. The donations come from your orders over $100. We hope to make bigger and bigger donations in 2009! Let's make some children's dreams come true!

2008.12.16 Just want to wish everyone a happy holidays and don't forget about our troops stationed overseas!
We are gearing up to release some new things in 2009! Smaller, low-cost items that are useful in many applications!

2008.10.29 We've updated the forums to Simple Machines which allows picture posting and alot of other fantastic features! Some user accounts got crunched in the process. Please re-register! Thanks and hope you enjoy the new forums!

We proudly support our troops!

 


Powered by WebRing.